Heavy Tow ECM Exchange Tunes incl. Hardware & Credits - Duramax L5P (2020-2021)
In stock
Sku: MO-116003010605
Improve your heavy towing performance and transmission on your 2017, 2018, 2019 Chevy Silverado or GMC Sierra.
Heavy Tow Tune
- For those towing any load up to GVWR (Gross Vehicle Weight Rating)
- + 90 RWHP, + 120 ft-lbs torque over factory
- Wide Torque curve to improve drive-ability while towing
- Perfect balance of sport driving & functionality
- Unhook and enjoy a sportier drive
Included in Our Price
ECM Upgrade Service (Engine Control Module)
- Remove your ECM and ship to HP Tuners. Will not be able to drive the vehicle since the ECM will be removed
- This option offers a direct servicing of your current ECM. You send it in, HP Tuners gets it ready for tuning, and sends it back
- Once re-installed you can flash our tunes
- No IMMO or Crank Relearn required
- Complete instructions how to remove your ECM carefully to avoid damage, ship, and re-install the modified ECM
OR
ECM Exchange Service (Engine Control Module)
- Send in an L5P ECM core to be modified
- Once re-installed you can flash our tunes
- This option requires doing the IMMO and Crank relearn
- Complete instructions how to remove your ECM carefully to avoid damage, ship, and re-install the modified ECM
HP Tuners MPVI3 Hardware
- Bluetooth, Expansion Port, Mobile Device Support
- Read your engine, Write our tested Tunes, Drive better
- VCM (Vehicle Control Module) Editor, Scanner and USB cables
- Most powerful scanning, diagnostic and logging
8 HP Universal Credits
CAN Communication Harness
- used when exhaust sensors are disconnected
- communicates with the fuel tank level
- re-establishes communication between ECM & fuel tank components
* Transmission Tuning is not yet available for 2020, 2021 models
Motor Ops uses the latest calibration information available when processing your custom ECM tuning. It is advised that all 2020+ truck owners consult their GM Dealer to ensure the TCM has the latest calibration update available. If after programming there is a Reduced Power message and/or U0101 DTC, it is likely that the ECM was updated but the TCM was not. Please reprogram the TCM.
Hide 0 Price | No |
---|