Shop by Engine:

Sport Economy ECM Exchange Tuning incl. Hardware & Credits - Duramax L5P (2020-2021)

filter sort

In stock


Sku: MO-116003010405

Under normal circumstances we recommend the ECM purchase, however, while there are supply chain issues, the L5P ECM exchange or upgrade may get your truck tuned sooner.  We send you instructions how to remove your ECM from your parked vehicle and provide clear instructions how to pack and ship your ECM to HP Tuners.   Upon receipt, HP Tuners will verify that your ECM is in working order and then ship you a Modified ECM.  Once you receive it, we will have instructions how to re-install it and program it with Motor Ops tuning.  HP tuners advises us that receiving, validating and shipping the Modified ECM should take up to a couple of weeks depending on shipping choices.

$3,335.54 CAD
Customize
Motor Ops L5P Single Tune   + $1,219.99 CAD
HP Tuners MPVI2+   + $512.99 CAD
HP Tuners Universal Credits x 8 for ECM   + $512.82 CAD
CAN Communication Harness 2020 L5P   + $256.41 CAD

* Required Fields

Price as configured:

$3,335.54 CAD

Your Customization
Sport Economy ECM Exchange Tuning incl. Hardware & Credits - Duramax L5P (2020-2021)
Sport Economy ECM Exchange Tuning incl. Hardware & Credits - Duramax L5P (2020-2021)

In stock

Summary

    Sport Economy Tune

    • Fun “unloaded” daily driving
    • For driving around town, highways
    • Impress your friends
    • Put a smile on your face
    • + 140 RWHP, +300 ft-lbs torque over factory
    • Puts your vehicle near the 550 RWHP mark

    Included in Our Price

    ECM Upgrade Service (Engine Control Module)

    • Remove your ECM and ship to HP Tuners. Will not be able to drive the vehicle since the ECM will be removed
    • This option offers a direct servicing of your current ECM. You send it in, HP Tuners gets it ready for tuning, and sends it back
    • Once re-installed you can flash our tunes
    • No IMMO or Crank Relearn required
    • Complete instructions how to remove your ECM carefully to avoid damage, ship, and re-install the modified ECM
    • OR

    ECM Exchange Service (Engine Control Module)

    • Send in an L5P ECM core to be modified
    • Once re-installed you can flash our tunes
    • This option requires doing the IMMO and Crank relearn
    • Complete instructions how to remove your ECM carefully to avoid damage, ship, and re-install the modified ECM

    HP Tuners MPVI2 Hardware

    • Bluetooth, Expansion Port, Mobile Device Support
    • Read your engine, Write our tested Tunes, Drive better
    • VCM (Vehicle Control Module) Editor, Scanner and USB cables
    • Most powerful scanning, diagnostic and logging

    8 HP Universal Credits

    CAN Communication Harness

    • used when exhaust sensors are disconnected
    • communicates with the fuel tank level
    • re-establishes communication between ECM & fuel tank components

    * Transmission Tuning is not yet available for 2020, 2021 models

    Motor Ops uses the latest calibration information available when processing your custom ECM tuning. It is advised that all 2020+ truck owners consult their GM Dealer to ensure the TCM has the latest calibration update available. If after programming there is a Reduced Power message and/or U0101 DTC, it is likely that the ECM was updated but the TCM was not. Please reprogram the TCM.

    More Information
    Hide 0 Price No