Shop by Engine:

LINCO DIESEL PERFORMANCE- LML FUEL PRESSURE SENSOR FOOLER

filter sort
In stock
Both LDP10400 and LDP10401 Included
$74.99 CAD
2011-16 LML Duramax trucks are equipped with a fuel filter restriction sensor. This sensor sends a signal to the ecm if vacuum is too high between the filter and cp4 indicating a restricted filter. These sensors are starting to have two common failures. 1- The sensor fails electrically setting a fault code in the ecm causing a change filter message and zero percent filter life displayed that can not be reset. 2- The sensor leaks. Trucks that do not have an aftermarket fuel system will have a crank no start. Trucks with a lift pump will have a fuel leak and hard start. We have developed a fix for both issues! The fooler which plugs into the factory harness and sends the correct signal to the ecm for normal fuel pressure(vacuum) and the delete plug which allows user to remove the sensor all together. Our delete plug is oringed for a leak free install and is available with or without 1/8npt female threads for the perfect mounting location of an aftermarket fuel pressure sensor! NPT plug included if not installing gauge. NOTE- This product is not intended to mask a rail pressure issue! If you are getting a change fuel filter message only under hard acceleration you have low rail pressure! Diagnose your low rail issue and fix it. This product does however fix the issues with a faulty or leaking sensor as advertised. Fix 2 common issues with your LML duramax with the LDP10400 and LDP10401!